Software recommend "FinePrint" saves you money on paper and toner

Detail

Use FinePrint to significantly reduce printing costs while enhancing and managing complex print jobs.

Function

• save paper and ink
• print booklets
• print double-sided
• print multiple pages onto a sheet
• delete unwanted pages
• create electronic letterhead
• add watermarks, headers, footers
• save as JPEG, TIF, BMP

Download Here

Software recommend "PrintPunk" Print To Fit

Automatically fit web pages to the printed page from Internet Explorer! Make any web page fit to printer page automatically!

Download Here

Purge Test Pattern

Download Here

Reset Printer Canon MP110

1. Enter SERVICE MODE By pressing Menu-Scan-Copy-Scan
2. Enter NVRAM by pressing <--- or ---> then OK
3. Enter CMY ink level by pressing <--- or ---> then OK
4. Select 1 by pressing <--- or ---> then OK
5. Enter K ink level by pressing ---> then OK
6. Select 1 by pressing <--- or ---> then OK
7. Press reset ( design: // )

Reset Printer Canon i6500

1. Press feed button hold on and press power button
2. Press feed button twice
   
3. Release feed and power button
   
4. Wait...press feed button three time
5. When green light standby unplug power printer
   

Reset Printer Canon iP1880

1. Press power button
2. Press resume button few minute
3. Open cover
4. Remove cartridge and install again
5. Turn Off ... Turn On

Waste ink full manual reset for Brother

(support...DCP315C/310CN/120C/115C/117C/110C)

1. Press the Menu and Mono Start keys. Next press the key four times to make the machineenter the maintenance mode.
2. Enter 8 and 0 by using the and Set keys.* (*To enter a numerical code on models having no numerical keypad, press the key several times to display the numerical code to be entered and then press the Set key. Repeat this operation for each numerical code.)
3. Enter 2, 7, 8, and 3 by using the and
4. Set keys to reset the purge count to zero.*
5. Press the Stop/Exit key to return to the initial stage of the maintenance mode.
6. Enter 9 twice by using the and Set keys to exit from the maintenance mode.

Mono Start key several times until the purge count appears on the LCD.

Clean Thermal heat (HP/Canon/Lexmark)

*** use warm water ***

Tip by : http://www.inkworldshop.com

Disable status monitor printer canon(chip)

• at window status
  

• disable status monitor

Tip by : http://www.inkworldshop.com

Dotmatrix pins print test

Dotmatrix 24 pins print test
Dotmatrix 9 pins print test

Reset protection counter by "SSC Service Utility"

Software for clear buffer canon

Software for clear buffer canon i255/i355
Software for clear buffer canon i320
Software for clear buffer canon iP1000
Software for clear buffer canon iP1200
Software for clear buffer canon iP1500
Software for clear buffer canon iP1500/1600/2200
Software for clear buffer canon iP1300/1700

Reset Printer Canon MP150/MP160

For E27 Code

1. With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
2. When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3. When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)
4. When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in orange and green, starting with orange.)note: press 4 times for waste ink counter reset.

The number of the Reset button pressing LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset

* Turn off the printer.( it must be turn off) then turn it on again.

Reset Printer Canon i850/i950/S600

Start with the printer OFF

1. Hold down RESUME and then hold down POWER
2. release RESUME
3. press RESUME twice, then release POWER
4. Let green light blink until printer is done futzing

Select function with RESUME press POWER to execute:
presses - light color - function

• Number of presses - light color - function
• 0 presses - green - Test print (or exit service mode on i960)
• 1 press - orange - EEPROM info print (plus grid nozzle diagnostic on i960)
• 2 presses - green - EEPROM initialize
• 3 presses - orange - Reset waste ink counter

Reset Printer Canon MPC190

1. Enter SERVICE MODE. By pressing Menu Copy Scan Copy Copy
2. Select TEST MODE.
3. Select [8] PRINTER TEST in TEST MODE.
4. Select 3. [EEPROM CLEAR].
5. Select 0. [INK COUNT].
6. Press the [Set] key.
7. Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.

Reset Printer Canon S9000

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.

Reset Printer Canon S900/S820/S750/S520

1. Turn off the printer.
2. Press and hold the RESUME button, then press and hold the POWER button.
3. While still holding the POWER button, Release the RESUME button, then press and release the RESUME button two more times in succession.
4. The printer mechanics will move momentarily. You are now in Service mode. Release the Power Button.
5. Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.
1. Service/factory test printout, including ink sensor check
2. EEPROM info printout
3. EEPROM initialization
4. Clear the waste-ink counter
5. Printer model setting. (more selections beyond this- leave this alone)
6. After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a restart.

Reset Printer Canon S300/S400/i5xx/i8xx/i9xxx/IP3000

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.

Reset Printer Canon F500/F900/F890/F700

(...S900, S820, S750 and S520)

1. Turn off the printer.
2. Press and hold the RESUME button, then press and hold the POWER button.
3. Release the RESUME button, then press and release the RESUME button two more times in succession. (you are still holding the POWER button during this). The printer mechanics will move momentarily.You are now in Service mode.
4. Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.

1. Service/factory test printout, including ink sensor check
2. EEPROM info printout
3. EEPROM initialization
4. Clear the waste-ink counter
5. Printer model setting. (more selections beyond this- leave this alone)

After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a resta

Reset Printer Canon BJC-3x/BJC-70

"F14 Error Reset"

1. Unplug adapter
2. Hold POWER
3. Plug in ADAPTER
4. Release POWER after printer starts
5. Hold FF and MENU and press POWER
6. Release after beeps
7. Press <> Cartridge until 1A is displayed
8. Press ONLINE
9. Press POWER to shutoff printer
10. Unplug printer then re-plug printer

Reset Printer Canon BJC-5x/8x/M40/M70

1. Unplug Power Cord
2. Hold POWER and RESUME buttons
3. Plug in Power Cord
4. Release buttons after the printers starts up
5. Hold CARTRIDGE and RESUME
6. Press POWER
7. Release all buttons after the beeps
8. Press CARTRIDGE 16 times
9. Press RESUME
10. Unplug the Power cord

Reset Printer Canon BJC-6xx

1. Unplug Power Cord
2. Hold POWER and FF and Print Mode buttons
3. Plug in Power Cord
4. Release after the beeps

Reset Printer Canon BJC-3000/6x00/7x00/8000

(...S400 S450 F300 F600 F620 F800)

1. Power off printer
2. Hold Resume button then press and hold POWER, the beeper will sound once.
3. Hold POWER and release RESUME
4. Press RESUME twice
5. When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
6. Press Power to set data

Reset Printer Canon BJC-5000

1. Power off printer
2. Press and hold RESUME then press POWER, The indicator will start blinking.
3. While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
4. When the indicator lights steady GREEN, press RESUME four(4)times. The indicator should be GREEN.
5. Press Power to set data

Service Test Print

1. Power off printer
2. Press and hold RESUME then press POWER, The indicator will start blinking.
3. While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
4. When the indicator lights steady GREEN, press RESUME two(2)times. The indicator should be GREEN.
5. Press Power to Print

Nozzle Print

1. Power off printer
2. Press and POWER, until the printer beeps and release.

Demonstration Print

• While the printer in ON , , Press and hold RESUME until the printer plays a melody of beeps.

Reset Printer Canon BJC-2xx/BJC-4xxx

1. Unplug Power Cord
2. Hold POWER and RESUME buttons
3. Plug in Power Cord
4. Release buttons
5. Open front door of printer
6. Hold the CARTRIDGE and RESUME buttons
7. Press POWER
8. Release all buttons after the beeps
9. Press CARTRIDGE once
10. Press RESUME

Reset Printer Canon BJC-2000/BJC-2100

1. Remove the Cartridge
2. Unplug the AC Power Cord
3. Close Front access panel
4. Hold down the RESUME/RESET button and plug in the AC power cord
5. Release RESUME/RESET after plugging in the AC Power cord.
6. Press the RESUME/RESET once within 5 seconds and release the RESUME/RESET .
7. Press and HOLD RESUME/RESET for two seconds or more and release it.
8. Press and HOLD RESUME/RESET for two seconds or more and release it.
9. Unplug AC Power Cord to set data.

Reset Printer Canon BJC-1000

1. Remove Cartridge
2. Unplug the AC Power Cord
3. Hold down the RESUME button
4. Release RESUME after plugging in the AC Power cord.
5. Press the RESUME once within 5 seconds and release the RESUME .
6. Press and HOLD RESUME for two seconds or more and release it.
7. Press and HOLD RESUME for two seconds or more and release it.
8. Unplug AC Power Cord to set data.

Reset Printer Canon S450

1. Power off printer
2. Hold Resume button then press and hold POWER, the beeper will sound once.
3. Hold POWER and release RESUME
4. Press RESUME twice
5. Release Power button
6. When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
7. Press Power to set data

Reset Printer Canon "S" Series

1. Turn off the printer.
2. Press and hold the RESUME button, then press and hold the POWER button.
3. Release the RESUME button, Next press and release the RESUME button two(2) more times insuccession. Note: you are still holding the POWER button). The printer's carriage will "reset" or move momentarily. If the above was properly performed the printer will enter the "Service Mode".
4. Press the RESUME button 4 times, this will select the clear waste ink counter function. The lamp will alternate (change) color with each key press
   
1. Service/Factory test printout, including ink sensor check.
2. EEPROM - Info printout.
3. EEPROM - Initialization.
4. Reset the Waste ink counter.
5. Printer model setting. (More selections beyond this point - However it is best leave them unaltered - You have been warned!)

After selecting the desired mode (eg 4), press the POWER button to "set" the change, and return to the top of the function selection menu. Press the POWER button again to restart the printer.

Reset Printer Canon i320/i255

Step 1: Manual Temporary

1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
6. Release both buttons.

Step 2 : Software for Permanent Click To Download

1. Reconnect the printer cable.
2. Open General Tools software and select (USB PORT)
3. Choose (SET DESTINATION 1) And it should be reset.

Remark "After service mode please use software for permanent reset"

Reset Printer Canon IP1500

1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator should be green
6. Release both buttons

Reset Printer Canon IP1000

1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
6. Release both buttons.
Click To Download

Reset Printer Canon IP2000 / 3000

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal..